The Martyrs Den

Martyrs Mist

In Bloom
Howdy all and welcome to my grow. My setup is in a 10 x 14 shed and I converted half of it to a flower room. Its lit by 2 vipar ks5000s and airflow is supplied by ac infinity and vivosun fans. For veg, I use a 2x3 with a cheapo blurple. I do a perpetual grow of my own crosses and usually only flower 4 at a time at different intervals. This time, however, I ran a few labels to see if I can find something new. 1000006592.jpg
 
Howdy all and welcome to my grow. My setup is in a 10 x 14 shed and I converted half of it to a flower room. Its lit by 2 vipar ks5000s and airflow is supplied by ac infinity and vivosun fans. For veg, I use a 2x3 with a cheapo blurple. I do a perpetual grow of my own crosses and usually only flower 4 at a time at different intervals. This time, however, I ran a few labels to see if I can find something new. View attachment 234901
Whoa 😮 here we go!!!! Love the set-up
 
Still finishing up some mylar and odds and ends. Up til last week I had a 4x9( now cut up to make the room larger) and a 4x6 veg. I also raise predator bugs since I'm in a shed on the woods and dont use chems. So, if you see these guys, they are fam lol
 

Attachments

  • 20251022_201214.jpg
    20251022_201214.jpg
    161.1 KB · Views: 12
  • 20251023_161331.jpg
    20251023_161331.jpg
    125.6 KB · Views: 12
Lets see, ah, my soil. My mix is Promix hp, worm casting, azomite, humic acid, Gaia green all purpose, Glacial rock dust, mineriz3d phosphate, power bloom and some composed fish dirt. All soil sits a few months before use. I recycle everything, water with teas every other week and just plain water in between. Water schedule is usually every 4-5 days with smaller pots every 3.
 
Busy day doing the last of my electric. 3 dedicated 20amp lines. Way overkill but I had the space. Could prolly run the entire shed off one 20 amp, however, there is so.ething going on that will make this thread an adventure. You see, perfectly lined up with my shed, with an 18' space in the middle is a other shed. That's for music and hanging out. So, I plan to build a greenhouse in between them with a small pond connected to a french window that will open at the pond water level where I sit and smoke. It will be a tropical work of art when I'm done, with little waterfalls and a hydro and soil area to grow. I built and designed ponds pools and landscapes most of my life. Im now in our forever home and its time to do for me and the fam. Until then, ill bore ya all with my shed 🤣😂😂🤣😂
 
Busy day doing the last of my electric. 3 dedicated 20amp lines. Way overkill but I had the space. Could prolly run the entire shed off one 20 amp, however, there is so.ething going on that will make this thread an adventure. You see, perfectly lined up with my shed, with an 18' space in the middle is a other shed. That's for music and hanging out. So, I plan to build a greenhouse in between them with a small pond connected to a french window that will open at the pond water level where I sit and smoke. It will be a tropical work of art when I'm done, with little waterfalls and a hydro and soil area to grow. I built and designed ponds pools and landscapes most of my life. Im now in our forever home and its time to do for me and the fam. Until then, ill bore ya all with my shed 🤣😂😂🤣😂
Good enough for me!!
 
OK, so a temp pr permanent solution. I can use 2 aglex lights. For the money, they put out really good par and nice terped smoke. The 2k and 3k will cover the footprint well. Less heat and run a little cheaper, even though my electric bill is 6$ a month. Gotta love solar. Tbh, I think they are better than the vipars. So anyway, my other option is to repeat what's done on the broken light side and disconnect a wire on the other light and put the 3k aglex in the middle. Then, when the bad light is fixed, ill light up the sides but angle them. I drew a pic cuz im high and there was pen and paper in front of me, I didn't do the angled part when its fixed lmao1000006657.jpg
 
OK, so a temp pr permanent solution. I can use 2 aglex lights. For the money, they put out really good par and nice terped smoke. The 2k and 3k will cover the footprint well. Less heat and run a little cheaper, even though my electric bill is 6$ a month. Gotta love solar. Tbh, I think they are better than the vipars. So anyway, my other option is to repeat what's done on the broken light side and disconnect a wire on the other light and put the 3k aglex in the middle. Then, when the bad light is fixed, ill light up the sides but angle them. I drew a pic cuz im high and there was pen and paper in front of me, I didn't do the angled part when its fixed lmaoView attachment 234981
I'd say the two aglex 👌
 

Forum statistics

Threads
4,172
Messages
285,012
Members
2,260
Latest member
Scoutmom2
Back
Top Bottom